What to Expect During Entry Door Installation in Denver: A 2026 Homeowner’s Guide
Choosing a new front door is the exciting part. Knowing how installation will go is what helps the project run smoothly. If you have never replaced an entry door before, it helps to know the steps, what you need to prepare and what to ask your installer.
Explore Denver Entry Doors
Local Guidance. Trusted Products. Professional Installation.
Veteran-Owned
Service and personal attention.
25 Years Experience
Guidance through your project.
Family-Owned
A team focused on your home.
Expert Installation
Careful measurements and fitting.
Energy-Efficient Options
Compare complete-product ratings.
Homeowner Reviews
Read feedback from customers.
What to Expect During Entry Door Installation
A typical installation includes a measurement and consultation, a confirmed order, preparation of the opening, removal of the old door, fitting and sealing the new frame, hanging the door, installing hardware, and a final check with you. How long each step takes depends on the door, the opening and any repairs needed, so ask your installer for a schedule in writing instead of relying on a general estimate.
The installation process at a glance
- Measure and consultThe installer measures the opening and checks the frame and threshold
- Confirm the scopeMaterial, size, glass, finish, hardware and what the quote includes
- Remove and prepareThe old door comes out and the opening is inspected and prepared
- Set, seal and hangFrame set and sealed, door hung, hardware installed
- Final walkthroughCheck the work, the finish and the paperwork together

Before Installation Day
Consultation and Measurement
The process starts with a look at your entry. The installer measures the opening, checks the condition of the frame and threshold and talks through your options for material, style, glass and hardware.
Confirming Your Choices and the Scope
Before ordering, confirm the door material, size, glass, finish and hardware, and what the quote includes: frame, threshold, trim, removal and finishing. Get the scope and price in writing so there are no surprises.
Older Homes, HOAs and Historic Districts
If your home was built before 1978, ask about lead-safe work practices. The EPA recommends hiring a contractor who is certified and trained in them for that kind of work. If you are in a historic district or an HOA community, check exterior rules before you order, and ask your installer whether a permit applies to your project.
On Installation Day
The exact steps vary, but most installations follow this general order:
- Protect the area. The installer protects floors and nearby surfaces.
- Remove the old door. The door, and often the frame and trim, are taken out.
- Inspect the opening. The installer checks the rough opening for rot, damage or an out-of-square frame.
- Prepare the opening. Any needed repairs and adjustments are made so the new frame can sit properly.
- Set the new frame. The frame is set level, plumb and square, then secured.
- Seal the frame. Gaps between the frame and the rough opening are sealed. The U.S. Department of Energy recommends expanding foam caulk between the frame, the rough opening and the threshold before interior trim goes on.
- Hang and adjust the door. The door is hung, and the threshold, sweep and weatherstripping are adjusted for a tight seal.
- Install hardware. The handle set, deadbolt and any smart lock are installed and tested.
- Finish the trim. Trim and any needed caulking or touch-ups are completed.
What If the Installer Finds a Problem?
Sometimes the old door hides surprises, such as rot in the frame or sill, water damage or an opening that is out of square. These are often found only once the old door is out. Ask in advance how your installer handles them: how they will tell you, how any added work is priced and how you approve it before it happens.
After Installation
Before the installer leaves, walk through the work together:
- Open and close the door several times and check the latch and deadbolt.
- Look for light or gaps around the edges.
- Check the finish, glass and hardware for scratches or damage.
- Ask for care instructions for the finish and hardware.
- Ask for warranty paperwork and how to reach service if you need it.
The Department of Energy suggests checking exterior door weatherstripping every year and replacing it when it wears, which is a good habit to start with a new door.
How to Prepare Your Home
- Clear the area inside and outside the entry so the crew can work.
- Move furniture, rugs and wall hangings away from the door.
- Plan for pets and children to be kept away from the work area.
- Make sure there is parking and access for the crew and their equipment.
- Plan how you will secure and use another entrance during the work.
Remember that the opening is exposed during replacement, so ask how your installer plans around weather and how the opening is secured if work spans more than a day.
Questions to Ask Your Installer
- What is the schedule, and what happens if weather changes it?
- Who will be at my home, and are they employees or subcontractors?
- How are hidden problems handled and priced?
- Do you follow lead-safe practices on older homes?
- What does the warranty cover, and who services it?
- What is included in cleanup?
Frequently Asked Questions
What happens during entry door installation?
The installer measures, confirms the order, removes the old door, inspects and prepares the opening, sets and seals the new frame, hangs the door, installs hardware and finishes the trim, then walks through the work with you. Details vary by home and installer.
How should I prepare my home?
Clear the area inside and outside the entry, move furniture and wall hangings, keep pets and children away from the work area, and make sure the crew has access and parking. Plan how you will use another entrance during the work.
What if hidden damage is found behind the old door?
Rot, water damage or an out-of-square frame are sometimes found only after the old door comes out. Ask in advance how your installer will tell you, how added work is priced and how you approve it before it happens, so there are no surprises on the final bill.
Do I need a permit to replace an entry door?
It depends on the project and your location, and rules can differ for historic districts and HOA communities. Ask your installer whether a permit or approval applies to your home before work starts. Do not assume, and get the answer in writing if approval is required.
Is lead paint a concern during door replacement?
Homes built before 1978 may contain lead-based paint, and work that disturbs painted surfaces can create lead dust. The EPA recommends hiring a contractor certified and trained in lead-safe work practices for those homes. Ask your installer whether they follow them.
What should I check before the installer leaves?
Open and close the door several times, test the latch and deadbolt, look for gaps or light around the edges, and check the finish, glass and hardware. Ask for care instructions and warranty paperwork, and how to reach service.
How long does entry door replacement take?
A straightforward replacement may fit into a single workday. Ask for a project-specific estimate if the opening, trim, sidelights, or surrounding finishes need additional work.
What is included with a prehung entry door?
A prehung unit pairs the door slab with a frame and hinges. Confirm whether your quote also includes the threshold, weatherstripping, trim, and lock hardware.
Can I keep my existing lock or smart deadbolt?
Sometimes. Ask the installer to check the new door’s bore size, backset, thickness, and clearance before planning to reuse the lock.
Can I replace the trim at the same time as the door?
Yes. Specify which interior and exterior trim pieces you want replaced and whether painting, staining, or touch-ups are included.
Should my new entry door swing in the same direction?
Start by checking where the door will clear furniture, steps, and an existing storm door. Confirm the swing and hinge side on the written order before the door is built.
Can my existing storm door stay in place?
The installer can check whether it fits the new opening and clears the new handle and trim. Ask whether removal, reinstallation, or replacement is included.
Related Articles
Keep planning with these door and window guides.

Choosing a Window Replacement Company in Denver
Compare installers, written estimates, and warranty terms.
Read the Company Guide
Window Replacement Cost in Denver
Understand the details that affect your window project budget.
Explore Window Costs
Drafty Doors and Windows: When to Replace
Explore common comfort problems and replacement signs.
Read the Comfort Guide
Fiberglass vs. Steel Entry Doors
Compare appearance, maintenance, and material options.
Compare Door MaterialsReady to Plan Your Denver Project?
Talk through product options, installation and pricing with our Denver team.
Denver Door & Window Replacement · Denver Entry Door Replacement · Denver Window Replacement · Denver Homeowner Guides
Request a Free EstimateCall (303) 653-9560